rocks
hellas stones
>
Installierung
 
installation
Apply a layer of primer on the surface to be covered.


installation
Apply a layer of glue (preferably grey coloured) on the surface to be covered.

installation
Apply a layer of glue on the covering material to be used.


installation
Start applying the material at the corners of the surface to be covered and then move towards the sides.
installation
Use a wheel cutter to shave off excess material.



installation
For best results, the use of metal guides is suggested, always checking that they are lined up correctly.

installation
After removing the metal guides, use a thin brush to flatten the rabbet between the pieces of the covering material..
installation
After the whole surface is finished and everything has dried out, apply a layer of varnish on the whole surface.
 
installation
Apply a layer of primer on the surface to be covered.


installation
Apply a layer of glue (preferably grey coloured) on the surface to be covered.

installation
Apply a layer of glue on the covering material to be used.


installation
Use a wheel cutter to shave off excess material.


installation
Start applying the material at the corners of the surface to be covered and then move towards the sides.
installation
After putting all stones in place, clean and varnish the whole surface.

 
 
Copyright © 2008 - 2010 Hellas Stones
Created & Hosted by Itbiz
rocks
 
  Ol?icoYn dYonln, Hellasstones, Ol?icoln dlonln, ol?icoU dlonteaoa, OL?ICOA DLONUEAOA, OL?ICOLO DLONLO, aeaedoecoeeYn dYonln, dYonln ldYiaoocn, AeaedoecoeeYn DYonln, LdYiaooc od??do, dYonln ldYiaoocn, dYonln, aeaedoecoeeYn dYonln, ol?icoT dYona, ol?icoYn dYonln, DLONLO LDLIAOOCO, DLONLO, dYona, ol?icoa dlonueaoa, Ol?icoYn dYonln, Hellasstones, Ol?icoln dlonln, ol?icoU dlonteaoa, OL?ICOA DLONUEAOA, OL?ICOLO DLONLO, aeaedoecoeeYn dYonln, dYonln ldYiaoocn, AeaedoecoeeYn DYonln, LdYiaooc od??do, dYonln ldYiaoocn, dYonln, aeaedoecoeeYn dYonln, ol?icoT dYona, ol?icoYn dYonln, DLONLO